The road dust suction vehicle

1.The road dust suction vehicle is a special environmental sanitation equipment integrating road cleaning, dust suction and garbage recycling. Based on the principle of negative pressure dust suction and equipped with an efficient filtration system, it can quickly remove floating dust, small particles and various loose garbage on the road surface. It is widely used in various scenarios such as municipal roads, industrial parks, mine factories, urban squares and residential districts. It can not only complete regular road cleaning, but also cope with in-depth cleaning of heavily polluted road surfaces such as those after milling construction and coal mine factories, effectively suppressing dust pollution and protecting air quality. It is one of the indispensable core equipment in the modern environmental sanitation cleaning system. It breaks the disadvantage that traditional cleaning equipment is prone to secondary dust, achieves the cleaning goal of "clean suction, no disturbance and high efficiency", takes into account practicality and environmental protection, and adapts to the all-weather operation needs.

2. Adopting a pure suction operation mode, no water sprinkling is needed to suppress dust. The floating dust raised by the sweeping disk is completely sucked away through the spiral cyclone suction, and with a multi-level filtration system, it can effectively filter fine dust. The dust concentration during operation is controlled within 2.5mg/m³, and the cleanliness of the emitted gas is far higher than the industry's environmental protection standards, avoiding secondary pollution from the source and significantly improving the air quality in the operation area.

3.It can flexibly cope with different road conditions such as dry and wet, support one-key switching between dry and wet modes, and can operate all-weather in sunny and rainy days. It can not only clean conventional scenarios such as municipal roads and squares, but also adapt to heavily polluted scenarios such as road milling, mixing stations and coal mine factories. It can absorb particles and dust with a particle size of less than 50mm, and the cleaning efficiency is as high as more than 98%.

4.The cab is equipped with a high-definition monitoring system and a PLC one-key intelligent control system, so the operation status is clear at a glance. It can realize one-key control of operation start and stop, mode switching, suction cup lifting and other operations, reducing the labor intensity of operators; the core components are reasonably designed, the filter cartridges can be disassembled separately, there are few wearing parts, no frequent replacement of sweeping brushes is needed, the annual maintenance cost is much lower than that of traditional road sweepers, and the labor cost can be greatly saved compared with manual cleaning.

5.The dust suction and pneumatic conveying system is optimized through computer simulation, the fan efficiency is increased by 14%, the air volume is 10% higher than the industry average, achieving stronger suction and lower energy consumption; it can customize dust cover sweeping and suction schemes, pure suction schemes, leaf crushing devices, etc. according to user needs, adapting to the personalized cleaning needs of different scenarios.